Home
Videos uploaded by user “Obsessive Vaping”
The biggest problem using cotton in a genesis style atomizer
 
04:45
This video will hopefully address the most common problem people have when using cotton in a genesis style atomizer. I've heard people complaining that they get bad tasting vapes after trying cotton in their genny's. 99.9% of the problem is that the cotton is too dense going through the wick hole of the atomizer. Cotton swells considerably when it get's wet. If the cotton is too dense in the wick hole, when it swells from the juice it will swell so much that it restricts the flow of juice up to the coil. The result of this is dry / semi dry vapes that taste bad. In this video I address that problem and show a technique that will prevent the dry vapes. For more cotton builds and answers to your cotton questions please visit and join the FB group Obsessive Cotton Disorder at https://www.facebook.com/groups/vapingobsessivecottondisorder/
Views: 21171 Obsessive Vaping
Kraken clone RBA with dual wick and single Tiger coil vapor production
 
05:54
Here's a short video showing the vapor production of a Kraken clone with dual wicks and a single Tiger coil. For more information about using cotton in vaping atomizers please visit and join the Facebook group Obsessive Cotton Disorder at https://www.facebook.com/groups/vapingobsessivecottondisorder/
Views: 11882 Obsessive Vaping
How To Build The Orchid v2 Tank Atomizer (Part 2)
 
06:12
Here is part 2 of a two part video showing how to build an Orchid v2 RTA. The build is metered at .76 ohms, built with 28 gauge Kanthal wrapped around a 1/8" bit, (dual coil), and is wicked with Japanese organic cotton. The Orchid v2 ladies and gentlemen, is be all means the Kayfun, Aqua and Fogger v4 killer, (imho). It has the same post configuration as the Plume Veil RDA and the airflow design of the Aqua and Fogger v4. It has a perfect draw to vapor ratio, imho. It does go through some juice, very similar to how the Kraken vapes through juice. Usually on a tank atomizer the draw leaves much desired. Not on this puppy! It works great without the need to modify anything. You could easy enough, but, there is no need too. Do yourself a favor and buy one of these amazing atomizers today, you won't be sorry. As an a friend said to me, "It's a driver's dripper"! The Orchid v2 simply ROCKS! For more information about using cotton in vaping atomizer builds, please visit and join the Obsessive Cotton Disorder Facebook group at https://www.facebook.com/groups/vapingobsessivecottondisorder/
Views: 8836 Obsessive Vaping
Vapor Production From The Geyser Dripping Atomizer RDA
 
02:08
Here is a short video demonstrating the vapor production from a quad coil build on the Dark Ronin Modz Geyser dripping atomizer RDA. When I first laid eyes on Dark Ronin Modz Geyser dripping atomizer RDA, it was love at first site! It is a very unique atomizer, both in looks and function. Imo, I think it's sexy! It has four posts, two positive and two negative and incorporates a juice distributor that is made of Teflon that sets in the middle of the four posts. The juice distributor has a cone shaped top with 4 downward sloped fingers the juice flows down to the coils on. When juice is dripped from the drip tip hole the juice drops onto the distributor and flows to the coils. It is a very ingenious design. The inside of the top cap is domed and the chamber is slightly reduced, contributing to a very flavorful vape. There are four air flow holes. An air hole is situated under each coil locations. The Geyser was designed to utilize three different coil configurations, dual, triple and quad coil builds. It has a unique adjustable airflow design that helps it produce a very large amount of vapor and flavor. The top cap doesn't have any o-rings to wear out, in instead threads onto the atomizer base. The Geyser is machined out of 304 stainless steel and the quality machining is apparent. Dark Ronin Modz has done a fantastic job with the design of this vaping dripping atomizer. I am very pleased with the purchase of my Geyser dripping atomizer RDA. Please note though, the Geyser is an advanced builders' atomizer. It will challenge your building skills to fully utilize it's potential. If you like Obsessive Vaping videos and learn something from them please subscribe to the Obsessive Vaping YouTube channel. Also, if you would like to learn more about using cotton in vaping atomizer consider joining the Obsessive Cotton Disorder Facebook group at https://www.facebook.com/groups/vapingobsessivecottondisorder/ Thanks for watching and Vape On!
Views: 2237 Obsessive Vaping
Vapor Production From The Aris Dripping Atomizer (RDA)
 
03:48
This is a short video demonstrating the vapor production from the Aris dripping atomizer that is built using 28 gauge Kanthal wrapped 9 times around a 1/8" drill bit, vertical dual coils, wicked with Japanese cotton and meters out to .86 ohms. It's not so much a vapor producer as it is a flavor beast. People looking for an atomizer that produces a superior flavor need look any further than this atomizer! For more information about using cotton in rebuildable vaping atomizers please visit and join the Obsessive Cotton Disorder Facebook group at https://www.facebook.com/groups/vapingobsessivecottondisorder/
Views: 7958 Obsessive Vaping
How to build a dual cotton wick setup for the AGA-T2 atomizer
 
22:16
In this video I show how to build a double cotton wick setup on the AGA-T2 Genesis style atomizer. It's an easy and quick build. It vapes very well and has good flavor. I now build all of my genny style atomizer's like this because it's simple and easy to do. And this isn't just for the AGA-T2. This technique can be used on most, if not all Genesis style atty's with single or dual wicks. Try it and you just might be impressed. *Note: I use sterile Ultra Pure cotton balls I purchased from my local pharmacy for making the wicks. It's important to use only 100% cotton. Thanks for watching and VAPE ON!!! Check out my Facebook group Obsessive Cotton Disorder for more cotton build info and tips. https://www.facebook.com/groups/vapingobsessivecottondisorder/ Song list: 1) Dawn 2) Harmonious Death 3) Stay The Night 4) Parasites 5) Bottled Eden I want to thank T-Bone of Zoetic Rhythm for letting me use his music. Please check out Zoetic Rhythm at http://soundcloud.com/planetzr for some awesome music and free downloads.
Views: 20301 Obsessive Vaping
How to build a Kayfun Lite clone with a chimney micro coil and cotton wick
 
32:13
In this video I show how to build a Kayfun Lite clone with a chimney micro coil and cotton wick. The coil is made with 28ga Kanthal, 8 wraps around a 3/32" bit that metered out at 1.1 ohms. Please visit and join the Facebook group Obsessive Cotton Disorder for more information about using cotton as a wicking medium for vaping atomizers at https://www.facebook.com/groups/vapingobsessivecottondisorder/
Views: 9334 Obsessive Vaping
How to wrap a Tiger atomizer coil
 
10:46
A short video showing how to wrap a Leo Shim Tiger atomizer coil. For more information about using cotton in vaping atomizers please visit and join the Facebook group Obsessive Cotton Disorder at https://www.facebook.com/groups/vapingobsessivecottondisorder/
Views: 11983 Obsessive Vaping
Vapor Production From The Orchid v2 Tank Atomizer
 
04:55
This is a short video showing the vapor production from an Orchid v2 rebuildable tank atomizer, (RTA, RBA). The build is made with 28 gauge Kanthal wire wrapped 8 times around a 1/8" bit (dual coil), wicked with Japanese cotton and meters out to .76 ohms. For more information about using cotton with rebuildable vaping atomizers visit and join Obsessive Cotton Disorder Facebook group at https://www.facebook.com/groups/vapingobsessivecottondisorder/
Views: 5754 Obsessive Vaping
Vapor production from a dual coil, 26ga, eight wrap "Crazy 8" build
 
02:05
This video shows the vapor production from a dual coil "Crazy 8" build on a Trident RDA. The coil specs are 26 gauge Kanthal, 8 wraps around a 1/8" bit, and the build metered at .6 ohms. For more information about building atomizer coils with cotton wicks please join the Facebook group Obsessive Cotton Disorder at https://www.facebook.com/groups/vapingobsessivecottondisorder/
Views: 6964 Obsessive Vaping
How to build a dual ribbon nano coil setup for a Trident RDA clone
 
18:05
This video shows how to build a dual nano ribbon coil build for a Trident RDA clone. The coils are wrapped with .4mm x .1mm ribbon Kanthal, 10 wraps around a small paperclip (.032"). And the build metered out at .63 ohms. Please join the Obsessive Cotton Disorder Facebook group for more information about building atomizers with cotton wicks. https://www.facebook.com/groups/vapingobsessivecottondisorder/
Views: 45599 Obsessive Vaping
Crazy 8 Coil Redux Vapor Production w/ High Wattage Box Mod
 
02:36
In this video I am showing the vapor production and readdressing a build and video that I made almost a year ago. In the old video I made a "Crazy 8" build on a Trident RDA using 26 gauge Kanthal and it metered at .6 ohms. The problem was that I was running it on a mech mod and it didn't heat up quite fast enough for my liking. Since then I have built myself a 50w SX350 chip box mod, and what a difference that makes. With the high wattage, regulated box mod I am able to turn up the wattage and therefore heat up the coils quicker. So I decided to try the "Crazy 8" build once again. The current build is made with 24 gauge Kanthal, wrapped 8 times around a 1/8" bit and unfolded in half, dual coils and metered at .4 and wicked with Japanese cotton. The build is installed on a Helios atomizer. The high wattage box mods that are regulated are the S**t! They are so versatile, you can run Kanger ProTanks or EVOD's or some serious sub-ohm atomizers on them. If you haven't already, consider purchasing or, building your own regulated high wattage box mod. I'm sure you will be impressed with the performance of it. For more information about using cotton in vaping atomizers please visit and join the Obsessive Cotton Disorder Facebook group at https://www.facebook.com/groups/vapingobsessivecottondisorder/ Also, if you enjoyed this video and/or learned something from it, please subscribe to my YouTube channel. Thanks for watching!
Views: 5132 Obsessive Vaping
How To Build A Plume Veil RDA (Dripping Atomizer)
 
22:15
In this video I am demonstrating how to build a Plume Veil dripping atomizer for vaping. The Plume Veil RDA has some unique airflow controls that can be adjusted to tailor the flavor, vapor production and temperature of the vape. I made this build a little different than the way I normally do it. Instead of building to .6 ohms, this build is 1.2 ohms. I'm using the Plume Veil on a regulated 50 watt box mod. I like running the higher ohm builds with the high wattage adjustable mods because you can run them at high wattage. The coils heat up quickly and since the coils are usually larger and have more surface area, which equates to better flavor when the juice is vaporized. https://www.facebook.com/groups/vapingobsessivecottondisorder/
Views: 34527 Obsessive Vaping
How To Build The Orchid v2 Tank Atomizer (Part 1)
 
33:35
Here is part 1 of a two part video showing how to build an Orchid v2 RTA. The build is metered at .76 ohms, built with 28 gauge Kanthal wrapped around a 1/8" bit, (dual coil), and is wicked with Japanese organic cotton. The Orchid v2 ladies and gentlemen, is be all means the Kayfun, Aqua and Fogger v4 killer, (imho). It has the same post configuration as the Plume Veil RDA and the airflow design of the Aqua and Fogger v4. It has a perfect draw to vapor ratio, imho. It does go through some juice, very similar to how the Kraken vapes through juice. Usually on a tank atomizer the draw leaves much desired. Not on this puppy! It works great without the need to modify anything. You could easy enough, but, there is no need too. Do yourself a favor and buy one of these amazing atomizers today, you won't be sorry. As an a friend said to me, "It's a driver's dripper"! The Orchid v2 simply ROCKS! For more information about using cotton in vaping atomizer builds, please visit and join the Obsessive Cotton Disorder Facebook group at https://www.facebook.com/groups/vapingobsessivecottondisorder/
Views: 21133 Obsessive Vaping
FT V5 clone vapor cloud production using 70% PG 30% VG Ejuice
 
01:10
This is the result of the RDA build I did in a previous How To video. This is a FT V5 rebuildable dripping atomizer with dual 28ga Kanthal, 7 wrap micro coils weighing in @ .64 ohms using a cotton ball wick with 70pg/30vg ejuice. *Note: The cotton I use is sterile Ultra Pure 100% cotton balls bought from my local pharmacy. It's very important to only use 100% cotton as a wicking medium. Thanks for watching and VAPE ON!!! Facebook group; Obsessive Cotton Disorder https://www.facebook.com/groups/vapingobsessivecottondisorder/
Views: 9260 Obsessive Vaping
How to build a Kraken RTA clone with dual wicks, single Tiger coil setup
 
19:47
In this video I show how to build a Kraken clone with a dual wick, single Tiger coil setup. The Kraken really shines when it comes to building with cotton, as it makes installing the wicks easy without the glass tank installed, allowing for wick adjustment. For more information about using cotton in vaping atomizers please visit and join the Facebook group Obsessive Cotton Disorder at https://www.facebook.com/groups/vapingobsessivecottondisorder/
Views: 72893 Obsessive Vaping
Custom Vaping Mod Stands
 
06:00
If you would like a custom Mod Stand please contact me at the Facebook group Obsessive Cotton Disorder. I run the group. https://www.facebook.com/groups/vapingobsessivecottondisorder/
Views: 1025 Obsessive Vaping
How to make a micro coil for an atomizer
 
02:54
A short video showing the basics of making a micro coil for rebuildable dripping atomizers, genesis style atomizer's and other types of atomizer's. The coil that I made in this video isn't the prettiest or most efficient, Keep in mind that this is just a primer video to give you an idea of how it is done. Watch the video and apply what you learn to take your building skills to the next level. Have fun! Thanks for watching. VAPE ON!!! Check out my Facebook group Obsessive Cotton Disorder for more cotton build info and tips. https://www.facebook.com/groups/vapingobsessivecottondisorder/
Views: 265826 Obsessive Vaping
How to build a Dual Vertical coil setup on an iGo-w
 
13:46
This is a video showing how to build a dual vertical coil setup on an iGo-W dripping atomizer. The build specs are: dual micro coils wrapped with 28gauge A1 Kanthal, wrapped 6 times around a 1/8" bit, metered at .6 ohms and using cotton ball as a wick. For more information about building atomizers using cotton as a wick, please visit and join the Facebook group Obsessive Cotton Disorder at; https://www.facebook.com/groups/vapingobsessivecottondisorder/
Views: 19763 Obsessive Vaping
Vapor production from my first "TriCro" coil build
 
01:20
My first build attempt using a "TriCro" coil. Dual 28ga TriCro coils installed on a Trident RDA clone. Many thanks goes out to Rip Tripper for providing his excellent HowTo video. Are you interested in building atomizers with cotton wicks? If so, please check out the Obsessive Cotton Disorder group on Facebook. https://www.facebook.com/groups/vapingobsessivecottondisorder/
Views: 7696 Obsessive Vaping
Dual vertical coil, 28ga, 6 wraps at .57 ohms. Vapor Production
 
01:33
Vapor production with dual vertical coils, 28ga, 6 wraps at .57 ohms with cotton on an FT Chimbus with two 3/32" air holes. Good flavor and cool vapor. Better than horizontal coils, better air circulation. Please visit https://www.facebook.com/groups/vapingobsessivecottondisorder/ for more information about using cotton wicks in all types of atomizers.
Views: 3550 Obsessive Vaping
How To Build The Aris Dripping Atomizer (RDA)
 
27:07
In this video I show how to build the Aris dripping atomizer. The build is made with 28 gauge Kanthal wrapped 9 times around a 1/8" drill bit, dual vertical coils and metered out at .86 ohms. The Aris dripping atomizer is designed to produce the best flavor possible and not so much the vapor cloud. Although, it's no slacker when it comes to producing vapor, either. The building deck has a unique three post design. It has two gold plated negative posts and one gold plated positive post with the air flow being implemented through a machined center post which directs the air flow from the center out past the coils. The outside diameter of the Aris is 23mm. It has a very deep juice well that holds approx. 3 ml of ejuice. It also has a glass w/ stainless steel top cap, with a small vapor chamber and comes with it's own glass/ss drip tip. It is a flavor beast! For more information about using cotton in vaping atomizers please visit and join the Obsessive Cotton Disorder Facebook group at https://www.facebook.com/groups/vapingobsessivecottondisorder/
Views: 25810 Obsessive Vaping
AGA-T2 atomizer with dual cotton wicks in action
 
00:42
A very easy to build RBA setup using cotton. The coils are 28ga Kanthal with 6 wraps @ .6 ohms. VAPE ON!!! *Note: I use sterile Ultra Pure cotton balls I purchased from my local pharmacy for making the wicks. It's important to use only 100% cotton. Check out my Facebook group Obsessive Cotton Disorder for more cotton build info and tips. https://www.facebook.com/groups/vapingobsessivecottondisorder/
Views: 3122 Obsessive Vaping
Vapor Production With A Hammer Mod & Kayfun Lite Clone
 
01:56
This is a short video I made to show the vapor production from a Tobeco brand Hammer clone mod and Kayfun Lite clone. Running in 18650 mode with a Sony VTC4 battery. The voltage drop under load was .8 volts. On the Kayfun I'm running a 28ga, 8 wrap chimney coil metered at 1.1 ohm's with a cotton wick. For more information about rebuilding and using cotton in vaping atomizers please visit and join the Obsessive Cotton Disorder Facebook group here; https://www.facebook.com/groups/vapingobsessivecottondisorder/
Views: 2374 Obsessive Vaping
Vaping Battery Comparison - 10 amp vs 30 amp
 
06:49
In this video I compare 10 amp batteries with the Sony 30 amp battery in a vaping situation. For more vaping information please visit and information about vaping with cotton, join the Obsessive Cotton Disorder Facebook group. https://www.facebook.com/groups/vapingobsessivecottondisorder/
Views: 13239 Obsessive Vaping
How to make a "Crazy 8" dripping atomizer coil
 
04:48
Here is a short video showing a basic technique for making a "Crazy 8" dripping atomizer coil. If you use cotton, or, interested in using cotton in your atomizer builds, please consider joining the Obsessive Cotton Disorder group on Facebook. https://www.facebook.com/groups/vapingobsessivecottondisorder/ Thanks for watching, Vape On and Vape Strong!!!
Views: 19142 Obsessive Vaping
Reg'd High Wattage Box Mod And The Crazy 8 Build Redux
 
21:10
In this video I am readdressing a build and video that I made almost a year ago. In the old video I made a "Crazy 8" build on a Trident RDA using 26 gauge Kanthal and it metered at .6 ohms. The problem was that I was running it on a mech mod and it didn't heat up quite fast enough for my liking. Since then I have built myself a 50w SX350 chip box mod, and what a difference that makes. With the high wattage, regulated box mod I am able to turn up the wattage and therefore heat up the coils quicker. So I decided to try the "Crazy 8" build once again. The current build is made with 24 gauge Kanthal, wrapped 8 times around a 1/8" bit and unfolded in half, dual coils and metered at .4 and wicked with Japanese cotton. The build is installed on a Helios atomizer. The high wattage box mods that are regulated are the S**t! They are so versatile, you can run Kanger ProTanks or EVOD's or some serious sub-ohm atomizers on them. If you haven't already, consider purchasing or, building your own regulated high wattage box mod. I'm sure you will be impressed with the performance of it. For more information about using cotton in vaping atomizers please visit and join the Obsessive Cotton Disorder Facebook group at https://www.facebook.com/groups/vapingobsessivecottondisorder/ Also, if you enjoyed this video and/or learned something from it, please subscribe to my YouTube channel. Thanks for watching!
Views: 1541 Obsessive Vaping
Vapor Production From An Aqua Atomizer
 
02:58
The build is a dual coil, 28ga Kanthal, wrapped 6 times around a 1/8" bit, metering out to .6. The Kayfun Killer lives up to it's name! For more information on using cotton in vaping atomizers, please visit and join the Obsessive Cotton Disorder Facebook group at https://www.facebook.com/groups/vapingobsessivecottondisorder/
Views: 912 Obsessive Vaping
How to build a Atmomixani 3D dripping atomizer clone
 
33:28
The dual coils are 26ga Kanthal, 6 wraps on a 1/8" bit and metered at .3 ohms and using a Sony VTC4 30amp battery to fire it on a Nemesis clone. In this video I disassemble, reassemble and build an Atomomixani 3D clone. This dripping atty has a built in tank and can be "re-dripped" using it's unique wick re-saturation design. For more information about building atty's and using cotton in vaping atomizers please visit and join the Facebook group Obsessive Cotton Disorder at https://www.facebook.com/groups/vapingobsessivecottondisorder/
Views: 15591 Obsessive Vaping
How to build the Dark Horse RDA .2 ohm build
 
22:52
In this video I demonstrate building the Dark Horse atomizer with dual parallel coils. Imo, it is a very nice RDA that comes with a standard drip tip or "chub cap" option. The post holes are large enough to accept most any gauge wire a person would want to use. The build I did was dual 26g parallel coils, 7 wraps per coil on a 2.5mm mandrel. It metered at .24 ohms.
Views: 5811 Obsessive Vaping
Vapor production with a Helios RDA clone, dual coil build
 
03:56
This is a short video showing the vapor production with a Helios RDA clone, dual coil build. The coils are made with 26ga Kanthal, 6 wraps around a 1/8" bit and meters out to .4 ohms. Great vapor production and great flavor. There is lot's of room in this RDA to build with. Dual coils are a breeze to build as well as quad coil builds, due to the unique positive post design. The positive post has a machined block at the top with two holes for the coil leads. One drawback with the Helios clone is that it comes with only one air hole drilled in it. You will want to drill a second hole 180 degrees from the original hole. I drilled the holes in mine to 3/32". For more information on building atomizers using cotton wicks, please visit and join the Facebook group Obsessive Cotton Disorder at https://www.facebook.com/groups/vapingobsessivecottondisorder/
Views: 3932 Obsessive Vaping
How to build a dual coil rebuildable dripping atomizer (RDA)
 
12:21
A short video showing the basics of building a rebuildable dripping atomizer the setup I made in this video isn't the prettiest or most efficient, Keep in mind that this is just a primer video to give you an idea of how it is done. Watch the video and apply what you learn to take your building skills to the next level. Have fun! Thanks for watching. VAPE ON!!! Check out my Facebook group Obsessive Cotton Disorder for more cotton build info and tips. https://www.facebook.com/groups/vapingobsessivecottondisorder/
Views: 36142 Obsessive Vaping
My High Wattage Box Mod Impressions
 
10:12
In this video I give my opinion/impressions of the high wattage box mods. They are extremely versatile. You can run tank atomizers, low ohm built atomizers and more. I tend to run mine at 40 watts with a 1.0+ ohm build. The higher ohm builds usually have a larger coil (more wraps) which equates to more surface area. The more surface area means that more juice is being vaporized, which gives you more flavor and vapor. You can push the wattage to the higher ohm coils and they heat up fairly quick. Try firing a 1.+ ohm build on a mechanical mod and you will see that it takes awhile for the coils to heat up. Fire the same build on a regulated high wattage mod with the wattage pumped up and the coils heat up considerably faster. Thanks for watching! https://www.facebook.com/groups/vapingobsessivecottondisorder/
Views: 1753 Obsessive Vaping
Vapor production from a Dark Horse RDA .2 ohm, dual parallel coils
 
01:12
This is the vapor production from a Dark Horse RDA with dual parallel coils metered at .22 ohms. 26g, parallel, 7 wraps around a 2.5 mandrel.
Views: 898 Obsessive Vaping
Overview and Build Of The FishBone Plus RDA
 
26:49
This is a brief overview and build of the Fishbone Plus RDA. It is designed for excellent flavor and produces very good vapor as well. The build is a Clapton dual coil @ .5 ohm's. The Clapton coils are 28 gauge Kanthal, wound with 32 gauge Kanthal wire.
Views: 4105 Obsessive Vaping
How To Build The Veritas
 
21:13
In this video I am building on a Veritas dripping atomizer. The build is made with 28 gauge Kanthal wire wrapped 6 times around a 3/32" drill bit, dual coils. It meter's at .7 ohms. The Veritas atomizer was designed for flavor. It has a reduced chamber and a unique airflow design that promotes better flavor. Thanks for watching the video, I hope it helps the vapers that are wondering how to go about building on it. https://www.facebook.com/groups/vapingobsessivecottondisorder/
Views: 20872 Obsessive Vaping
How to build a Dragon Quad coil rebuild on a Nimbus clone RDA
 
23:57
In this video I show how to build a quad Dragon coil build on a Nimbus clone rebuildable dripping atomizer. The coils are made of 28ga kanthal, 15 wraps on a .031" paperclip each, and ohm out to .64 ohms per the four coils. For more information and more How To videos please look in the files section at the top of the Facebook group Obsessive Cotton Disorder at https://www.facebook.com/groups/vapingobsessivecottondisorder/
Views: 16264 Obsessive Vaping
How To Build The Geyser Dripping Atomizer RDA
 
31:55
In this video I am showing how to build the Geyser dripping atomizer RDA with a quad coil setup. When I first laid eyes on Dark Ronin Modz Geyser dripping atomizer RDA, it was love at first site! It is a very unique atomizer, both in looks and function. Imo, I think it's sexy! It has four posts, two positive and two negative and incorporates a juice distributor that is made of Teflon that sets in the middle of the four posts. The juice distributor has a cone shaped top with 4 downward sloped fingers the juice flows down to the coils on. When juice is dripped from the drip tip hole the juice drops onto the distributor and flows to the coils. It is a very ingenious design. The inside of the top cap is domed and the chamber is slightly reduced, contributing to a very flavorful vape. There are four air flow holes. An air hole is situated under each coil locations. The Geyser was designed to utilize three different coil configurations, dual, triple and quad coil builds. It has a unique adjustable airflow design that helps it produce a very large amount of vapor and flavor. The top cap doesn't have any o-rings to wear out, in instead threads onto the atomizer base. The Geyser is machined out of 304 stainless steel and the quality machining is apparent. Dark Ronin Modz has done a fantastic job with the design of this vaping dripping atomizer. I am very pleased with the purchase of my Geyser dripping atomizer RDA. Please note though, the Geyser is an advanced builders' atomizer. It will challenge your building skills to fully utilize it's potential. If you like Obsessive Vaping videos and learn something from them please subscribe to the Obsessive Vaping YouTube channel. Also, if you would like to learn more about using cotton in vaping atomizer consider joining the Obsessive Cotton Disorder Facebook group at https://www.facebook.com/groups/vapingobsessivecottondisorder/ Thanks for watching and Vape On!
Views: 11177 Obsessive Vaping
How to use the Kuro Concepts Coil jig
 
16:31
The Kuro Concept Coil Jig kit. In this video I demonstrate how to use this coil jig. It's very easy to use and a great accessory for the beginner or seasoned rebuilder. You can wrap parallel as well as regular single wire coils. No more sore fingers from using large gauge wire!
Views: 69762 Obsessive Vaping
How To Build An Aqua Atomizer
 
20:44
In this video I show how to build an Aqua atomizer using 28ga Kanthal, 6 wraps on a 1/8" bit, dual coils with an ohm reading of .6. The Kayfun Killer it has been called, as the Aqua produces more flavor and more vapor than the Kayfun. For more information about using cotton in atomizer builds please visit and join the Obsessive Cotton Disorder Facebook group at https://www.facebook.com/groups/vapingobsessivecottondisorder/
Views: 1608 Obsessive Vaping
Aqua Fogger Kayfun Orchid Style Vapor Production w/Cotton
 
09:06
I was inspired by Robert Green of the vaping community to make this video after he had stated there is no universal wicking method to use for cotton in vaping atomizers. This is true. However, while there isn't ONE specific method, there is ONE general rule of thumb for wicking an Aqua Fogger Kayfun or Orchid style atomizer. Density, yes the density of the cotton will make or break ANY atomizer build using cotton. On the Genesis style atomizer's the density of the cotton is even more critical the on the tank style atomizers. And I have addressed the issue with using cotton in Genesis style atomizers in a couple of previous videos that I have done. Density is the key. If the cotton is too dense it will restrict the flow of juice to the coil(s) resulting in semi to completely dry hits. If the cotton is not dense enough the result will be a constantly juice leaking atomizer build. You have to experiment a little to find what will work for your style of build/vape. In this video I show how I wick my cotton in builds for Aqua Fogger Kayfun Orchid tank style atomizers. If you have learned something from my videos please consider subscribing to my channel and/or recommend my videos to others that may find them helpful. Also, for more information about using cotton in vaping atomizers please visit and join the Obsessive Cotton Disorder Facebook group at https://www.facebook.com/groups/vapingobsessivecottondisorder/
Views: 831 Obsessive Vaping
Vapor production with a Quad Dragon coil build on a Nimbus clone
 
01:03
A short video showing the vapor production on a Quad Dragon coil Nimbus clone. For more information on using cotton in vaping atomizer builds please visit and join the Facebook group Obsessive Cotton Disorder at https://www.facebook.com/groups/vapingobsessivecottondisorder/
Views: 5337 Obsessive Vaping
How to build a dual coil Crazy 8 setup (26ga, .6 ohms)
 
18:42
This video shows how to build a dual coil setup using two Crazy 8 coils. Each coil is eight wraps of 26 gauge Kanthal, wrapped around a 1/8" bit. The build meters at .6 ohms. For more information about building RDA's and RBA's using cotton for a wicking medium please join the Facebook group Obsessive Cotton Disorder at https://www.facebook.com/groups/vapingobsessivecottondisorder/
Views: 72127 Obsessive Vaping
Vaping Peanut Gallery Comments
 
16:29
Just a short video about comments and the vaping community.
Views: 223 Obsessive Vaping
Vapor Production From The Plume Veil RDA
 
01:44
This is just a short video demonstrating the vapor production from a 1.2 ohm build, (28ga Kanthal, 12 wraps around a 1/8" drill bit, dual coil) fired on a regulated box mod at 40 watts. The atomizer is a Plume Veil RDA which has several airflow controls to tailor the vape to your liking. https://www.facebook.com/groups/vapingobsessivecottondisorder/
Views: 2677 Obsessive Vaping
Phil Busardo at VaperCon 3 giving a shout out
 
00:18
Phil Busardo at VaperCon East 3 giving a shout out to a member of the Obsessive Cotton Disorder Facebook group. https://www.facebook.com/groups/vapingobsessivecottondisorder/
Views: 3215 Obsessive Vaping
Geyser Dripping Atomizer RDA Review
 
15:20
In this video I am giving my first impressions of the Geyser dripping atomizer features. When I first laid eyes on Dark Ronin Modz Geyser dripping atomizer RDA, it was love at first site! It is a very unique atomizer, both in looks and function. Imo, I think it's sexy! It has four posts, two positive and two negative and incorporates a juice distributor that is made of Teflon that sets in the middle of the four posts. The juice distributor has a cone shaped top with 4 downward sloped fingers the juice flows down to the coils on. When juice is dripped from the drip tip hole the juice drops onto the distributor and flows to the coils. It is a very ingenious design. The inside of the top cap is domed and the chamber is slightly reduced, contributing to a very flavorful vape. There are four air flow holes. An air hole is situated under each coil locations. The Geyser was designed to utilize three different coil configurations, dual, triple and quad coil builds. It has a unique adjustable airflow design that helps it produce a very large amount of vapor and flavor. The top cap doesn't have any o-rings to wear out, in instead threads onto the atomizer base. The Geyser is machined out of 304 stainless steel and the quality machining is apparent. Dark Ronin Modz has done a fantastic job with the design of this vaping dripping atomizer. I am very pleased with the purchase of my Geyser dripping atomizer RDA. Please note though, the Geyser is an advanced builders' atomizer. It will challenge your building skills to fully utilize it's potential. If you like Obsessive Vaping videos and learn something from them please subscribe to the Obsessive Vaping YouTube channel. Also, if you would like to learn more about using cotton in vaping atomizer consider joining the Obsessive Cotton Disorder Facebook group at https://www.facebook.com/groups/vapingobsessivecottondisorder/ Thanks for watching and Vape On!
Views: 7851 Obsessive Vaping
KangerTech Subox Mini Starter Kit Overview
 
21:21
This is a short overview of the KangerTech Subox Mini Starter Kit. I was so impressed with this rig that I wanted to do a review of it. Also, I point out a few things to keep in mind if you are new to vaping or, you are considering to purchase your first vaporizer.
Views: 2732 Obsessive Vaping
Vapor production from a Atmomixani 3D dripping atomizer
 
04:10
A short video showing the vapor production from 3D clone atty. The dual coils are 26ga Kanthal wrapped 6 times around a 1/8" bit, metering out to .3 ohms on a Nemesis clone mod powered by a Sony VTC4 30amp battery. For more information about building vaping atomizers using cotton please visit and join the Obsessive Cotton Disorder Facebook group at https://www.facebook.com/groups/vapingobsessivecottondisorder/
Views: 1537 Obsessive Vaping
Vapor production from an iGo-W dripping atomizer
 
01:31
This is my "Doughnut" build using cotton as a wick. The build is a dual coil setup. The coils are made of 28ga. Kanthal with 5/6 wraps around a 1/8" bit. Ohm reading for the build is .6 ohms.
Views: 1791 Obsessive Vaping

Termios sample cover letter
Civil service essay writing
Sample cover letter for student radiologic technologist
Business writing service
Frimley park run newsletter formats